FREE SHIPPING on Orders over $199.00

1/3

Spray Gun Cups

Customers also bought these popular items  

6 MONTHS INTEREST-FREE WITH PAYPAL CREDIT™

 

2095 1Qt. Cup Assembly - New SEPTEMBER 2019

This is the exact same 1 Qt (1000cc) Cup Assembly currently installed by Fuji on their standard Turbine Spray Guns. The assembly includes the 2024 Pressure Tube, a fitted 2097 Gasket and 2096 Diaphragm. It is the diaphragm that helps prevent paint entering the pressure tube. It acts as a shield. The standard cup assembly is supplied with no coating on the inside. This can be used with all products although some water-based coatings can cause an unsightly staining inside the cup (usually harmless and never affecting the actual finish). NOT FOR FUJI COMPRESSOR GUNS MX-30 or LX-20. Please choose 6372-1Qt SIPHON CUP BELOW.

List: $69.80   Our Price $52.40

 

2092 1Qt  Aluminum Cup - New SEPTEMBER 2019

1Qt. Aluminum Cup. Recommended for everything except some water-based coatings that may stain the cup (usually harmless).

 

Accessory Plastic Cup Lids are NOT available for this cup.

 

List: $31.65    Our Price $23.75

2093T 1Qt Teflon-Coated Cup - New SEPTEMBER

1Qt. Teflon-Coated Cup with Teflon-Coating. For use with some corrosive water-based coatings. Not for use with Nitro-Cellulose Lacquers.

 

Accessory Plastic Cup Lids are NOT available for this cup.

 

List: $37.60    Our Price $28.20

9080 Mini Cup Set

8ozs Miniature Cup Assembly. Supplied with 2 Extra Cups and 3 Heavy-Duty lids equipped with Gaskets. This assembly is lightweight taking weight off the wrist. The small size allows access into confined areas such as cabinets, bookshelves etc. The Cup is pressurized so the spray pattern is always perfect.

 

You will think of many uses for these Cups – storing paints and stains. It’s great for quick color changes. Any type of touch-up work. Guitar Makers and Auto Touchup are just 2 areas where this Cup Assembly is proving to be popular.

9730 Mini Gravity Cup - Turbine

List: $55.20   Our Price $47.95

Miniature 9730 3ozs Gravity Cup is designed and built by Fuji Spray to meet the need for a small Touch-Up Gravity Cup for use in the Automotive field. This Cup can be used with the Fuji T-75G Gravity Spray Gun. Perfect for spraying smaller items or touch up. The 9730 model (as shown) is pressurized and comes with one 2024 Pressure Tube with Check Valve installed. Please NOTE* For the Compressor MPX-30 Spray Gun please choose the 6375 3ozs Gravity Cup (Non-Pressurized) shown HERE.

 

List: $57.95   Our Price $49.95

9740 400cc Gravity Cup

Fuji 400cc Gravity Cup Assembly is designed for the center-mounted Gravity T-Series Spray Gun. It includes a pressure tube with check valve, and new-style lid. 

 

For those who only spray smaller cabinet projects, bathtubs etc.

 

List: $50.55    Our Price $44.95

9760 600cc Gravity Cup

Fuji 600cc Gravity Cup Assembly is designed for the center-mounted Gravity T-Series Spray Gun. It includes a pressure tube with check valve, and new-style lid. 

 

Please note* This Gravity Cup can replace the Nylon cup that is pre-installed to the T75G.

List: $53.60    Our Price $46.90

9860 600cc Nylon Gravity Cup (for T-75)

Fuji Spray has designed a 600cc Nylon Gravity Cup and lid for the T-Series T-75G Gravity Spray Guns - NO GASKET REQUIRED. 

 

This cup assembly is offered with pressure tubing and a check valve.

The lid has been designed so that no gasket is necessary and yet have an excellent seal.

 

List: $52.80    Our Price $45.90

9775 1000cc Gravity Cup

Fuji 1000cc Gravity Cup Assembly is designed for the center-mounted Gravity T-Series Spray Gun. It includes a pressure tube with check valve, and new-style lid. 

 

For those who only usually spray larger not wanting to fill up so often.

List: $60.90    Our Price $53.90

9960 U-Tube Gravity Conversion

Converts any Fuji Spray Gun from Bottom Feed to Gravity. Can be used with other spray guns. Includes 400cc Aluminum Gravity Cup, Stainless Steel U-Tube, Pressure Tube with Check Valve.

 

Simple way to convert your Bottom-Feed HVLP Spray Gun into a Gravity Gun. Easily installed in about 3-4 minutes using only a standard wrench.

 

Pressurized cup supplied with 1 Long Pressure Tube/Check Valve.

List: $65.49    Our Price $52.99

5432 2Qt Pressure Pot - 4 & 5-STAGE ONLY

* Requires both a 25ft Hose and a Whip Hose to use *

This 2Qt. Pressure Pot Assembly Kit has everything you need to add additional material capacity using your 4 or 5-stage Fuji Spray HVLP System. WILL NOT WORK WITH 2 OR 3-STAGE TURBINES.

 

Features:

 

  • No need for bulky compressor. The Fuji Spray 4 or 5-stage turbine pressurizes the 2Qt. cup.

  • Ability to spray at any angle, including upside down.

  • Takes the weight off your arm and wrist.

  • Now your spraygun will easily fit in tight spaces.

 

Twice as much material capacity than your bottom feed spray gun, and more than three times the capacity of your gravity feed spray gun

 

Note: You will NEED BOTH a standard 25ft hose PLUS a 2049F Whip Hose in order to use your Fuji Spray 2Qt. Pressure Pot.

Important:  If you are using model 9600-G - GXPC Spray Gun, you will also need a 9060 L-Fitting.

List: $369.00    Our Price $269.00

6375 Mini Gravity Cup - Compressor

Miniature 6375 3ozs Gravity Cup is designed and built by Fuji Spray to meet the need for a small Touch-Up Gravity Cup for use in the Automotive field. This Cup can only be used with the Fuji MPX-30 & LX-20 Compressor Gravity Spray Guns. Perfect for spraying smaller items or touch up. The 6375 model (as shown) is Non-Pressurized. 

 

List: $59.99   Our Price $47.99

6372 1Qt. SIPHON Cup Assembly

This is the 1Qt (1000cc) SIPHON Cup Assembly for MX-30 & LX-20 Spray Guns. The assembly includes the fitted 6331 Gasket and 6332 Diaphragm. It is the diaphragm that helps prevent paint entering the pressure tube. It acts as a shield. The standard cup assembly is supplied with no coating on the inside. This can be used with all products although some water-based coatings can cause an unsightly staining inside the cup (usually harmless and never affecting the actual finish). FOR USE WITH FUJI COMPRESSOR GUNS MX-30 or LX-20 Only. For Turbine Spray Guns, Please choose the 2042-1Qt CUP ASSEMBLY ABOVE.

 

List: $49.90   Our Price $39.90