Customers also bought these popular items  

FREE SHIPPING on Orders over $199.00

6 MONTHS INTEREST-FREE WITH PAYPAL CREDIT™

 

1/3

5100 T-Spray Gun Aircap Sets

AIRCAP SETS for the T70 and T75G Spray Guns. COLOR CODED – Please note* the Air Cap Sets shown below can ONLY be used with the T-Series Spray Guns. Aircap Set includes Needle & Fluid Nozzle.

 

If you own the M-Model (7020 series), XPC Model or older XT/GT-X Spray Gun, please check the part numbers in your User Manual or see below.

List: $77.99   Our Price $61.99

5100-1 T-Series Air Cap Set 0.8mm – Orange

 

Fine (Finest) Output, Perfect for very fine work. Also good for small surfaces and thinner viscosity fluids. Shading stains/Inks, as well as touch-ups, zinc, dyes water-based finishes. FOR T-SERIES SPRAY GUN ONLY.

List: $77.99   Our Price $61.99

5100-2 T-Series Air Cap Set 1.0mm – Blue

 

Fine to Medium Output, Great for most fine finishing including water-based/borne coatings. Allows for thinner, wet coat to be applied. Automotive enamel and marine finishes. Nitrocellulose lacquers, sealer, cellulose acrylics, synthetics, polyurethane, stains, varnish, and primers. FOR T-SERIES SPRAY GUN ONLY.

List: $77.99   Our Price $61.99

5100-3 T-Series Air Cap Set 1.3mm – Silver

 

Medium Output, Similar to the #2 but with more coverage. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR T-SERIES SPRAY GUN ONLY

List: $77.99   Our Price $61.99

5100-4 T-Series Air Cap Set 1.5mm – Yellow

 

Medium Output, Similar to the #3 but requires less thinning. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR T-SERIES SPRAY GUN ONLY.

List: $77.99   Our Price $61.99

5100-5 T-Series Air Cap Set 1.8mm – Green

 

High Output, Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls), splatter paints and multi fleck paints. FOR T-SERIES SPRAY GUN ONLY.

List: $77.99   Our Price $61.99

5100-6 T-Series Air Cap Set 2.0mm – Red

 

High Output, Similar to the #5 but with more coverage. Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls), splatter paints and multi fleck paints. FOR T-SERIES SPRAY GUN ONLY.

List: $77.99   Our Price $61.99

5100-7 T-Series Air Cap Set 2.5mm – Teal

 

Extra High Output, Suitable for even larger areas/walls & ceilings. Ideal for fast coverage. Stone finish, texture coating, industrial primers, latex (walls and ceilings), high viscosity industrial coating and nitrate dope. FOR T-SERIES SPRAY GUN ONLY.

7020 M-Spray Gun Aircap Sets

AIRCAP SETS for the Semi-PRO & Hobby-PRO  Please note** the Air Cap Sets shown below can ONLY be used with the M-Series Spray Guns. Aircap Set includes Needle & Fluid Nozzle.

 

If you are unsure of which spray gun you own, please e-mail us a photo and we can advise you so you receive the correct parts.

List: $64.95   Our Price $49.95

7020-1 M-Series Air Cap Set 0.8mm

 

Fine (Finest) Output, Perfect for very fine work. Also good for small surfaces and thinner viscosity fluids. Shading stains/Inks, as well as touch-ups, zinc, dyes water-based finishes. FOR M-SERIES SPRAY GUN ONLY.

List: $64.95   Our Price $49.95

7020-2 M-Series Air Cap Set 1.0mm

 

Fine to Medium Output, Great for most fine finishing including water-based/borne coatings. Allows for thinner, wet coat to be applied. Automotive enamel and marine finishes. Nitrocellulose lacquers, sealer, cellulose acrylics, synthetics, polyurethane, stains, varnish, and primers. FOR M-SERIES SPRAY GUN ONLY.

List: $64.95   Our Price $49.95

7020-3 M-Series Air Cap Set 1.3mm

 

Medium Output, Similar to the #2 but with more coverage. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR M-SERIES SPRAY GUN ONLY. Please note* If you own the Semi-PRO Spray Gun, you already have this size setup installed.

List: $64.95   Our Price $49.95

7020-4 M-Series Air Cap Set 1.5mm

 

Medium Output, Similar to the #3 but requires less thinning. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR M-SERIES SPRAY GUN ONLY.

List: $64.95   Our Price $49.95

7020-5 M-Series Air Cap Set 1.8mm

 

High Output, Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls), splatter paints and multi fleck paints. FOR M-SERIES SPRAY GUN ONLY. Please note* If you own the Hobby-PRO Spray Gun, you already have this size setup installed.

List: $64.95   Our Price $49.95

7020-6 M-Series Air Cap Set 2.0mm

 

High Output, Similar to the #5 but with more coverage. Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls), splatter paints and multi fleck paints. FOR M-SERIES SPRAY GUN ONLY.

 

6300 MPX-30 Aircap Sets

AIRCAP SETS for the MPX-30 Spraygun. Please note** the Air Cap Sets shown can ONLY be used with the MPX-30 Series Compressor Spray Guns. Aircap Set includes the Needle & Fluid Nozzle.

 

If you are unsure of which spray gun you own, please e-mail us a photo and we can advise you so you receive the correct parts

List: $85.50   Our Price $68.50

6300-1.0 Air Cap Set 1.0mm

 

Fine (Finest) Output, Perfect for very fine work. Also good for small surfaces and thinner viscosity fluids. Shading stains/Inks, as well as touch-ups, zinc, dyes water-based finishes. FOR MPX-30 SERIES SPRAY GUN ONLY.

List: $85.50   Our Price $68.50

6300-1.3 Air Cap Set 1.3mm

 

Medium Output. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR MPX-30 SERIES SPRAY GUN ONLY  This Aircap Set is STANDARD on the MPX-30 Gravity Spray Gun.

6300-1.4 Air Cap Set 1.4mm

List: $85.50   Our Price $68.50

Medium Output. Fuller and wetter coat than with the 1.3mm. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR MPX-30 SERIES SPRAY GUN ONLY

6300-1.7 Air Cap Set 1.7mm

List: $85.50   Our Price $68.50

Medium to High Output. Fuller and wetter coat than with the 1.4mm. Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls). FOR MPX-30 SERIES SPRAY GUN ONLY. This Aircap Set is STANDARD on the MPX-30 Syphon Spray Gun.

6300-2.0 Air Cap Set 2.0mm

List: $85.50   Our Price $68.50

High Output. Fuller and wetter plus more coverage than 1.7mm. Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls). FOR MPX-30 SERIES SPRAY GUN ONLY

6200 LX-20 Aircap Sets

AIRCAP SETS for the LX-20 HVLP Spraygun. Please note** the Air Cap Sets shown can ONLY be used with the LX-20 Series Compressor Spray Guns. Aircap Set includes the Needle & Fluid Nozzle.

 

If you are unsure of which spray gun you own, please e-mail us a photo and we can advise you so you receive the correct parts

6200LX-1.0 Air Cap Set 1.0mm

 

Fine (Finest) Output, Perfect for very fine work. Also good for small surfaces and thinner viscosity fluids. Shading stains/Inks, as well as touch-ups, zinc, dyes water-based finishes. FOR LX-20 SERIES SPRAY GUN ONLY.

List: $84.90   Our Price $67.90

6200LX-1.3 Air Cap Set 1.3mm

 

Medium Output. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints.

FOR LX-20 SERIES SPRAY GUN ONLY 

List: $84.90   Our Price $67.90

6200LX-1.4 Air Cap Set 1.4mm

List: $84.90   Our Price $67.90

Medium Output. Fuller and wetter coat than with the 1.3mm. Automotive enamel, airplane and marine finishes. Nitrocellulose lacquers, water-based finishes, varnish, urethanes, enamel, latex for louver doors, trims and cabinets, and oil based paints. FOR LX-20 SERIES SPRAY GUN ONLY. Please note* This is the standard 1.4mm Air Cap already installed in your LX-20 HVLP Spray Gun.

6200LX-1.7 Air Cap Set 1.7mm

List: $84.90   Our Price $67.90

Medium to High Output. Fuller and wetter coat than with the 1.4mm. Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls).

FOR LX-20 SERIES SPRAY GUN ONLY. 

6200LX-2.0 Air Cap Set 2.0mm

List: $84.90   Our Price $67.90

High Output. Fuller and wetter plus more coverage than 1.7mm. Ideal for larger surfaces, and thicker layers. Catalyzed lacquers, primers, varnish, urethanes, enamel, industrial coating (higher viscosity), sealers, polyurethane, oil based paints, epoxy enamels, plastic, adhesives, floor paving paints, latex (walls). FOR MPX-30 SERIES SPRAY GUN ONLY

PLEASE NOTE: AIRCAPS & NOZZLES SHOWN ARE NOT INCLUDED WITH THE CASE.

5137 Carry Case - For Aircap Sets

Keep your Aircap sets neatly in one place.


Our Aircap Set Carry Case can store up to 4 sets of Needles, Nozzles and Aircaps. (Shown empty). Miniature pic shows case closed. Measures 9" x 7.5" x 1.75" and only 1/2lb in weight.

 

The T-Series (Part 5100-) and the M-Series (Part 7020-) will fit into this case.

Please note that the MPX-30 & LX-20 (Compressor Gun) Aircap Sets are not compatible with this case.

List: $14.60   Our Price $12.30

8050-3 GPX-1.0 Air Cap Set 1.0mm

 

Fine Output, Perfect for very fine work. Also good for small surfaces and thinner viscosity fluids. Shading stains/Inks, as well as touch-ups, zinc, dyes water-based finishes. FOR GPX SERIES SPRAY GUN ONLY.

List: $74.90   Our Price $58.00